FREE SHIPPING ON ALL US ORDERS! |  1-800-985-7814 |  TEXT-US |  EMAIL US |  FREE SHIPPING ON ALL US ORDERS

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Problem Solvers Handlebar Clamp Shim
$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Surly Hurdy Gurdy
$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.
Delta Stem Raiser
$29.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
KMC MissingLink Connector
$1.00 - $36.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Shimano In-Line Brake Cable Adjuster
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Problem Solvers Cassette Spacer
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Surly Cable Hanger
$10.50
One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.
Problem Solvers Cable Doubler
$55.99 - $79.99
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
Problem Solvers Deckster Clipless Pedal Adapter
$35.99
Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising. • Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay • Cleats not included • 85 x 95 x 10mm platform • Hardware included, cleats not included
Zipp CeramicSpeed Bearing Kit: 30/60 Rear Hub
$276.00
- Includes 61903 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 188v9, 30 and 60 rear hubs
SRAM eTap BlipClamp
$16.00
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
Zipp Vuka Evo Aerobar Extensions
$147.00
Carbon Vuka Extensions give you all the options needed to optimize your aero position. Available in four styles. Straight gets you low for that aggressive aero position. Ski-Tip places you in a position for speed as well as long-haul comfort. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. Race Vuka Shift, features the Race bend, moving the shifter closer to the rider’s hand by almost an inch by mounting the shifter directly onto the extension. This allows the rider to shift easily from their aerodynamic tuck. The Race Vuka Shift is compatible with SRAM 900 TT, 500 TT, R2C Aero Shifter and Zipp R2C shifters only. - Compatible with Vuka Clip and all 22.2 systems - Internal cable routing
Stages Cycling Replacement 30mm Spindles
$299.99
The spindles are manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with many SRAM BB30 road and SRAM BB30 mountain bike drive side cranks, as well as SRAM DUB MTB, Race Face Next SL and Specialized S-Works Road. The Stages Power meter 30mm spindles are specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retro fit of the new carbon Stages Power Meter to a rider's SRAM and Race Face drivetrain. Stages Cycling BB spindles are available in six options: A) SRAM Red 22 BB30 B) SRAM Force 22, Rival 22, Force/Rival CX1 C) 2015MY SRAM BB30 mountain cranks - 9mm spacer* D) 2015MY SRAM BB30 mountain cranks - 15.5mm spacer* E) Race Face Next SL - 168mm q factor F) Specialized S-Works Road - 2017/2018MY G) SRAM DUB MTB * Not compatible with 156mm Q-factor
Surly Singleator Pull-Up Spring
$4.20
- Replacement pull-up spring for the Surly Chain Tensioner
Surly Singleator Push-Down Spring
$4.20
Replacement push-down spring for the Surly Chain Tensioner
Zipp CeramicSpeed Bearing Kit: 30/60 88 Front Hub, 188 Rear Hub, and 30/60/S9 Rear Free Hub
$276.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 88, 30 and 60 front hubs Zipp 188v8 rear hubs Zipp ALL free hub driver bodies - These 61803 bearings are not interchangable with the 77/177 hub 61803 bearings
Zipp CeramicSpeed Bearing Kit: For Sub-9/Super-9 Hub
$276.00
- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs
Zipp Vuka Alumina Extensions
$60.00
Zipp developed an extensive line of aluminum aerobar extensions to provide the perfect fit for any rider, regardless of size or riding position. The Vuka Alumina Extensions offer three different bends to achieve your ideal fit. - Vuka Alumina Race feature 52mm of rise (175g). The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Vuka Alumina Evo are available with a 70mm (176g) or 110mm (180g) rise. Designed to deliver improved aerodynamics by placing hands closer together and nearer to the rider’s head to start airflow over the rider sooner.
Zipp Vuka Clip Riser Kit
$25.00
Zipp's Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip’s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. - Sold in pairs - Risers cannot be stacked - Includes hardware
Dimension Anodized Bolt M5x.8 16mm
$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually
ENVE Seatpost Battery Plug
$20.00
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.
Wheels Manufacturing Inc. Derailleur Hanger 26
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
SRAM eTAP Powerpack
$77.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).
SRAM IS Disc Brake Adaptor
$22.00
Disc Brake Adaptors - Includes Stainless Bolts
MSW KS-300 Two-Leg Kickstand
$29.99
- Stabilizes bike with double-leg stance - Fits most 26" and 700c bikes - Made of lightweight aluminum - Mounting plate included to fit a variety of bikes
SRAM Bottom Bracket Adaptor
$38.00
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
Wheels Manufacturing Inc. Derailleur Hanger 1
$32.00
This ingenious device allows you to get back home should you break your hanger out on the road or trail. Simply remove your broken hanger, derailleur and QR skewer nut. Put the QR skewer through the Emergency Hanger, remove the spring and re-attach the nut. Secure the QR nut and skewer down tightly. Re-attach the derailleur and away you go! In most cases you should have the ability to shift throughout half (or more!) of your rear cassette range. Sorry, this hanger is designed as a quick, Emergency fix to get you back home and is not designed for long term use. - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 76
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 108
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 145
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M4x10 Flat Head Screws Note: Wheels Mfg DROPOUT-145 is interchangeable with Wheels Mfg DROPOUT-218. #145 has three fasteners, where #218 has two.
Page 1 of 31 Next page